淮北附近有没有服务

Hello, welcome to the stainless steel water tank manufacturer!

National hotline

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Your location: home page > News Center > Industry trends

The stainless steel water tank foundation can adopt concrete strip beam, I-beam or "C" channel steel

Release date: May 8, 2020 Number of visits: four hundred and sixty

  Stainless steel water tank The foundation can be concrete strip beam, I-beam or "C" channel steel. The top corner of the stainless steel water tank is equipped with a ventilation air filtering device. The specification and quantity of the device are determined by the manufacturer according to the import size. Tie bars are used inside the stainless steel water tank. All nozzle flanges are 1.0MPa standard flange. Designers should refer to GB 17051-1997 sanitary code for secondary water supply facilities when arranging the water tank position. When the specification and technical parameters or orientation of the water tank are not suitable for the actual use, the designer of the stainless steel water tank shall propose and determine it according to the actual needs.


1. The stainless steel water tank was filled with water, and no leakage was found in 48 hours;

2. Whether there is water leakage at the pipe joints, valves and related accessories;

3. Observe whether the water supply system operates normally;

4. Check whether the water disinfection system works normally.

 Stainless steel water tank

clear

1. Close the inlet valve and open the drain outlet valve to drain the water in the water tank;

2. Access to water tank through ladder;

3. Clean the periphery and bottom of water tank with clean mop or cloth. If the scale is serious at the bottom, it can be scrubbed with soft towel and detergent;

4. Open the water inlet valve and flush the wall and bottom of the barrel with proper amount of clean water, so that the dirt can be discharged from the drain outlet. If necessary, it can be repeated several times until it is satisfactory;

5. Close the drain valve, open the water inlet valve, and fill the water tank with water again.


Specifications

Stainless steel square assembled water tank can be from 0.5T to 2000t, and can undertake different types of special production according to customer requirements.

Stainless steel round water tank can be from 0.5T to 200t, and can undertake different types of special production according to customer requirements.


Scope of application


All kinds of industrial and civil building water supply, heating and ventilation, fire fighting system;

Food, beverage, wine making and water treatment industries;

Pharmaceutical, petroleum and chemical industries;

Flexible and reasonable plate shape design is suitable for containers of various sizes.


All rights reserved by the manufacturer of stainless steel water tank Engine technology network

Scan and consult wechat customer service
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine