淮北附近有没有服务

Hello, welcome to the stainless steel water tank manufacturer!

National hotline

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Your location: home page > Product Center
  •  Heat preservation stainless steel water tank
  •  Heat preservation stainless steel water tank

Heat preservation stainless steel water tank

Product Description: The stainless steel heat preservation water tank refers to the heat preservation material as the core layer, the stainless steel water tank as the inner layer, and the ordinary stainless steel plate as the outer layer. The inner and outer stainless steel layer and the core layer are optimized to form a stainless steel water tank. The stainless steel heat preservation water tank is made of stainless steel plate, color steel plate as the surface layer, closed cell flame retardant self extinguishing polystyrene board or polyurethane as the core layer
contact number: eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Detailed introduction

    Heat preservation stainless steel water tank It refers to the insulation material as the core layer, the stainless steel water tank as the inner layer, and the ordinary stainless steel plate as the outer layer. The inner and outer stainless steel layer and the core layer are optimized to form a stainless steel water tank.

 

Heat preservation principle of stainless steel heat preservation water tank

Stainless steel heat preservation water tank takes stainless steel plate, color steel plate as surface layer, closed hole flame retardant self extinguishing polystyrene board or polyurethane as core layer. Through optimization combination, the internal and external layers can achieve the best insulation effect. The water tank has the advantages of beautiful appearance, high mechanical strength, excellent performance and convenient assembly.

Because of its light weight, high strength, beautiful and elegant appearance, stainless steel heat preservation water tank has a very good response in the market and has become a major choice of water storage containers. However, if the stainless steel water tank is not operated properly, it may cause some unnecessary faults. Therefore, we must pay attention to the maintenance in daily use to prolong the service life of the stainless steel water tank.

 360 screenshot 202004090993055445.jpg

After the water is discharged from the stainless steel water tank, the internal and other parts should be cleaned first. Special attention should be paid to the cleaning of the oil and dirt of the stainless steel heat preservation water tank and the dirt at the bottom of the stainless steel heat preservation water tank. As most of the dirt contains chemical substances, it has a certain corrosive effect, so after cleaning, it should be washed with alkaline water in time, and then washed with clean water.

Check whether there is corrosion and fracture on the connecting parts of each part. When using, install the clean water pipe for trial use, and then install other objects. When adding water, ensure the normal patency of the stainless steel heat preservation water tank, and the water level shall not exceed the safety water level line. Before use, open the water tank cover to make the air pressure in the barrel rise to the working pressure, so as to ensure the smooth water supply of the stainless steel heat preservation water tank.



Main parts of stainless steel heat preservation water tank

The main parts of water supply equipment are water tank and water pump. Although there are many types of water pumps on the market now, all pumps have a common problem - fear of blockage. Therefore, in order to prevent the blockage of the water pump, it is necessary to wash the medicine with clean water. When adding water, the filter screen can be used to filter, so as to prevent the blockage of the water pump.


Stainless steel heat preservation water tank refers to adding special industrial and thermal insulation materials in the interlayer of stainless steel water tank, so that the water in the stainless steel heat preservation water tank can maintain a certain temperature to meet the needs of life or industry. The stainless steel heat preservation water tank takes polyurethane insulation as the core layer, stainless steel water tank as the inner layer, and stainless steel plate (or aluminum zinc plating plate) as the outer layer. Through the combination of the internal and external layers, good thermal insulation effect can be achieved. It is suitable for hotels, offices, apartments and other places where warm water is required.

In 24 hours at room temperature, the temperature of stainless steel heat preservation water tank with polyurethane foam insulation material is less than 4 degrees, and that of other heat preservation materials is less than 10 degrees.

 360 screenshot 20200409093115772.jpg

The stainless steel heat preservation water tank is made of SUS304, SUS316L and other stainless steel plates, and the periphery is welded by TIG. The standard blocks of 1000 * 1000, 1000 * 500 and 500 * 500 are welded and assembled in the factory or project site with different thickness modules according to different 3D structure design parameters. The accessories on the water tank, such as manhole, inlet and outlet flange, internal and external ladder and water level gauge, can be selected according to the design requirements.



Precautions for stainless steel heat preservation water tank

1. The heat preservation water tank can be installed on flat roof, floor or household series, and can also be installed in outdoor balcony, indoor kitchen, toilet, etc.

2. The installation position of the heat preservation water tank should be convenient for the drainage of the sewage outlet, and the hot water tank should be close to the water consumption point and the installation position of the host machine as far as possible, so as to reduce the heat loss of the pipeline.

  3. For floor engineering, the water tank should be placed on the load-bearing beam regardless of its size; if the water tank is more than 5 tons, the customer is required to make a bearing foundation, and the bearing capacity of the bearing foundation should be greater than twice the weight of the water tank filled with water; when the floor is wide or the water tank is relatively large, it is recommended that the water tank be divided into several tanks and placed on the bearing beam (under normal conditions, a single circular water tank should not exceed 10 tons, and a single square water tank should not exceed 10 tons) Over 20 tons).

4. Stainless steel mirror should be placed on the roof of the heat preservation water tank to affect the surrounding office or living environment.

5. For the floor installation of the heat preservation water tank, the horizontal foundation with a height of more than 150 mm must be made, and the location of the water tank should not affect the surrounding residents.

6. The foundation of the heat preservation water tank shall be placed on a horizontal plane, and the foundation plane shall not have ponding phenomenon; if I-beam or channel steel welded support is used, the position of water tank must be paved with steel plate.

7. The circular heat preservation water tank should be placed vertically instead of horizontally.

8. The installation and maintenance space larger than 600mm shall be reserved around the water tank.

9. Since the circulating water pump equipped with the unit does not have suction head, the installation position of the water tank should not be lower than that of the unit. Considering the limited lift and not too high than the unit, it is better to place it at the same level if conditions permit

 360 screenshot 20200409093048916.jpg

Copyright? 2020 stainless steel manufacturer Engine technology network

Scan and consult wechat customer service
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine